• High-speed premium class wheel balancer
• Greatest for wide wheels
• New touch-screen interface design
• Clamping device 2.0 - patented pneumatic clamp
• One shot balancing by GREENWEIGHT technology. Wheel balancing in one cycle by one weight
• Any wheels effective balancing. The machine provides balancing of any wheel in 1 cycle
• High productivity is achieved due to the large number of technologies implemented in the machine.
FEATURES AND FUNCTIONAL COMPOMENT:
GreenWeight - wheel balancing in one cycle by one weight
Direct3D – accurate direct alloy rim measurement
S-Drive - automatic weight installation, wheel positioning and holding
AutoALU - automatic weight setting scheme estimation
NoTouch - no button pressing required
RimRunOut 2.0 - rim geometry troubleshooting with repair compare function
LaserPointer - six-o’clock weight position dot.
PowerGuard - power surge protection
TouchScreen - easy machine operating by one touch
Split – aesthetic tape weight installation
Serviced wheel counter
Installed weight counter
Detailed operation report with data export function
Six user profiles
Tire positioning function
Adaptor imbalance compensation
Voice Guide
Diameter and distance measuring electronic gauge arm
Width measuring sonic sensor
Pneumatic clamping device
High- precision spindle block (40 mm shaft diameter)
Laser pointer
Software Wi-Fi update function
Space saving wheel cover design
LED balance weight placement highlighting
Electro magnetic brake
Extended worktable space
Wheel backplate – better mud protection and ergonomic cone holder placement
Show more...
Add to comparison
6 USERS CAN OPERATE THE MACHINE IN PARALLEL
Simultaneous service of up to 6 sets of wheels. It is enough to enter the parameters of each set once. Switching between sets is carried out by pressing the icon on the screen
AUTOMATIC DISTANCE AND DIAMETER ENTRY BY THE GAUGE ARM
The balancing machine is equipped with the diameter and distance measuring electronic gauge arm which provides high speed operation and eliminates errors
CLAMPING DEVICE 2.0 FOR QUICK WHEEL INSTALLATION
Pneumatic shaft allows rapid wheel clamping without time losses during balancing.
High-quality wheel centering and balancing is achieved due to the any rim powerful equable tightening, regardless of its thickness
The sleeve is tightened automatically by the pedal making operator’s works easier
GREENWEIGHT TECHNOLOGY
New balancing technology in one cycle by one weight. Better vibration reduction compared to the traditional dynamic balancing.
NEW TOUCH SCREEN INTERFACE DESIGN
Easy machine control and quick access to all machine functions.
New generation interface makes balancing understandable, visual and comfortable (3D models, large icons, dark theme, animation, tooltips)
RIMRUNOUT 2.0 RIM GEOMETRY DISTURBANCE EVALUATION
Rim geometry troubleshooting with repaired and broken rim compare function.
If the rim is damaged, a message «Rim straightening IS REQUIRED» appears on the screen, and if the radial runout is not significant, the machine will display message «RUNOUT is normal». Measurement results are stored for each operator. Up to 6 rims can be measured and straightened in parallel.
THE BEST ERGONOMICS AMONG SIVIK BALANCING MACHINES
The machine shaft is placed as close as possible to the operator. Large shaft reach has been maintained - 284 mm for comfortable service even for the largest and widest wheels
The space saving cover design provides opportunity to put the machine close to the wall
Extended worktable with more storage cells for weights, cones, quick locking nut and other tools
THE MACHINE IS PROTECTED FROM POWER SURGE
PowerGuard technology reliably protects machine electronics from damage during power surges
THE PACKAGE SET INCLUDES A TAPE WEIGHTS DISPENSER
The use of tape weight dispenser allows to save weights, as well as organize neat weights storage on the machine worktable
THE SCOPE OF WORK ANALYSIS AND CONTROL
The machine generates a balanced wheels and installed weights detailed report with the ability to write on a SD-card.
You can track the work time, the size of the serviced wheels, the type and mass of installed weights.
TIRE POSITIONING FUNCTION
If the imbalance value is large, a tire positioning function can reduce the mass of the installed weights. It can be The optimization procedure under the machine guidance is faster and more accurate than manual one.
During a long (durational) optimization on the machine, it is possible to balance other wheels by switching to another operator.
WHEEL BACKPLATE
Convenient storage of cones and clamping sleeve on special backplate holders
The backplate protects the wall from dirt
WIDTH MEASURING SONIC SENSOR
The machine automatically enters the rim width.
The sonic sensor instantly reads the width when the cover is lowered.
The sonic sensor use increases the speed of steel wheels balancing.
Max. wheel weight
70
Rim diameter setting range
28
Rim width setting range
20
Measurement uncertainty
1
Machine weight
155
Display
Touch-screen
Rim diameter range
900
Overall dimensions
1335х1180х1850
Clamping sleeve
Standart
KS-234 LCV adapter set
Standart
LCV adapter set compatible for majority of LCV’s.
Sar-015
Standart
Clamping cup for quick-locking nut
STANDARD balance cone set SIVIK ARMOR
Standart
Weight pliers
Standart
Message sent successfully
Our website uses cookies (files with information on previous visits to this website) to improve your browsing experience and show personalized content. By choosing “I Accept”, you consent to personal data processing according to Privacy policy published on https://sivik.net/